This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation. To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations.Apply as much adhesive as can be covered within 10-15 minutes.įor faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.Grout joint should be a minimum of 1/16” and not butt set.The optimal trowel size is a 9" Trowel - 1/8" square notch. Grout joints should be packed full and free of voids and pits.We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller.īoth Sanded and Non-Sanded grouts are acceptable for use.Use a damp sponge for the final cleaning and to smooth out the grout joints.Acids should never be used for cleaning grout haze.Clean excess grout as the work progresses before it has hardened completely. It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90.The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting. Highly recommended to purchase the Unpolished Porcelain Maintenance Kit. Ceramic tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your ceramic tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying.
0 Comments
Leave a Reply. |